Solar irrigation + soil moisture
IRROMETER SPECIFICATION :
- Brass switch housing with adjustable barrel and 18 inch wire leads
- WEIGHT: 0.2 lbs (0.09 kg)
- DIMENSIONS: Body Length = 3.75 inch (95 mm) HEX = 1.0 inch (25 mm)
- RANGE: 5 to 85 centibar (kPa) with less than 10% of actuation point differential
- CONNECTION: 1/4 inch brass male NPT for all Models. MLT requires adapter
- MECHANISM: SPST Snap action switch with Buna-N diaphragm, closed at and drier than set point, rated for 1,000,000 cycles
- SWITCH RATING: 24 VAC 10 amp maximum. Includes 18 inch (45 cm) AWG 18 wire leads
CONTROLLER SPECIFICATION
- Power source: ambient light (PVM)
- Controller power input: 3000 – 100 000+ LUX
- 7 keypad buttons with integrated liquid crystal display
- Solenoid control orifice: .065” (1.65 mm)
- Encapsulated solenoid thread: 11/16” -12 UN male thread
- Retractable solenoid wire: 8.1”(coiled length when extended, approximately 36”)
- Sensor connection: normally closed 6”(15cm) yellow wire (16 AWG)
- Solenoid adapter: 11/16” -12 UN female thread x ¾” -20 UNEF male threaded
- Valve types & sizes: Globe ¾”, 1”, 1 ½” and 2”
GLOBE VALVE SPECIFICATION
- Valve type: Globe
- Valve sizes: Globe ¾”, 1”, 1 ½” and 2” NPT or BSP
- Valve inlet and outlet: female pipe thread (FNPT)
- Operating pressure range: 10 – 150 Psi (0.7 – 10.5 Bar)
- Bonnet solenoid thread: ¾”- 20 UNEF female threaded
- Flow rate: 0.1 to 160 GPM (0.23 to 36 m3/h)
